Addressable control module with built-in isolator of 1 voltage-free relay output providing non-resettable C, NO, NC contact. It takes one loop address. Direct feed from the loop. LED status indicator. Connection through removable strips up to 2.5mm2 section. Possibility of being installed in DIN rail or flat to wall mounting in box BOX-ONE. Consumption less than 300μA at rest. Red color. Dimensions: 100 x 82 x 23 mm. CPR certificate EN54-18 and EN54-17.

Category: Tags: ,


The range of MAD-400 modules has been developed to offer a wide and complete range of input and
output ports to be used with Detnov’s addressable fire control panels.
The MAD-400 modules allow performances and manoeuvres for the proper functioning of the fire
detection system, monitoring and/or acting according to the needs of the installation.
The MAD-400 modules have been designed to facilitate their installation process and they may be
installed using screws or fitted into a DIN rail. Each module is equipped with removable terminal
blocks and a LED status indicator. The addressing of the modules ir carried out through the PGD-200
programmer or auto addressing for isolator version.
The MAD-411 and MAD-412 modules provide 1 or 2 voltage free relay outputs to the addressable fire
detection system. To be used as a switch for a peripheral circuit. In the case of the module of 2 relay
outputs, they act independently, being able to assign specific manoeuvres to each of the outputs.
The MAD-411 and MAD-412 modules take the power supply directly from the loop and assigned a
number of loop addresses according to the number of inputs available in the module.
The MAD-411-I and MAD-412-I modules are equipped with integrated isolator.
All the range of MAD-400 modules can be installed inside the BOX-ONE and BOX-SIX boxes

420+ соработници со нас, зошто не и вие?

Изберете јазик »